Midisart® 2000 PTFE, 1’078,20 CHF

Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

Midisart® 2000 filtration units are ideal in the biotechnology, pharmaceutical and research industries where sterile vents, bio-isolation or sterile air and gases are required. The Midisart® 2000 is excellent for the following applications: - sterile ventilation of filling vessels and fermenters, including cell culture vessels and CO2 incubators (6 to 120 litres) - ventilation of storage vessels for sterile, distilled water and liquid media cultures - autoclave ventilation - in-line sterilisation of and particulate removal of air and gases, such as air sterilisation for small fermenters. Midisart® 2000 filtration units are specially designed to ensure easy handling with maximum safety. Tubing olives provide an easy and secure hold for tubing with an internal diameter of 6-12mm. Midisart® 2000 is very light, weighing only 20g, which prevents tubing from being pushed down and kinked. Advantages for the user: 1. easy handling: Midisart® 2000 is supplied individually packaged and pre-sterilised so that direct connection is possible. 2. reliability and safety: the Midisart® 2000 can be tested for integrity and provides reproducible results. - The membrane is reinforced with a grid of polypropylene, which gives the Midisart® 2000 unit additional stability and makes it resistant to pressures up to 3 bar (approx. 44 psi). - Midisart® 2000 completely prevents the penetration of moisture due to its natural hydrophobic PTFE material. In addition, Midisart® 2000 is biocompatible according to USP Plastics Class VI. - Midisart® 2000 units can withstand at least 20 autoclaving cycles without losing performance. The convenient memory discs supplied with each Midisart® 2000 in UPN coded boxes allow the user to keep track of the number of autoclaving cycles by marking each cycle. According to GLP and ISO standards for traceable documentation, this feature of the Midisart® 2000 is the appropriate solution. Quality Control Certificate: Each unit is automatically 100% tested to ensure that the housing seals and diaphragms are defect free. This is part of our Zero-Defect quality control testing. - The batch number and individual Midisart® 2000 unit number are printed on the housing of each Midisart® 2000 to ensure complete traceability. Before the Midisart® 2000 units are packed, they undergo a visual inspection. In addition to 100% leak testing, random samples taken from each batch undergo the following tests to ensure Sartorius Stedim Biotech's in-house quality standards: - Housing pressure test - Pressure retention test - Bubble point test - Pyrogen test - Sterile filtration capability - Flow rate test - Sterility test. Performance: With a diameter of only 64mm, the Midisart® 2000 covers a filter area of 20cm², meaning Midisart® 2000 achieves peak performance in flow rate. However, the Midisart® 2000 does not only multiply filtration performance in this way. It can be autoclaved at least 20 times at a temperature of 134°C. Chemical compatibility: The materials used in the Midisart® 2000 (PTFE and polypropylene) ensure excellent compatibility with solutions and other chemicals. Despite its high compatibility, the Midisart® 2000 can be affected by different factors, e.g. temperature, concentration, composition, etc.. Therefore, we recommend performing a test filtration run to find out whether the Midisart® 2000 is compatible with the specific medium to be filtered. The Midisart® 2000 can also be used for the filtration of water solutions. In this case, the membrane must first be moistened with alcohol to overcome the hydrophobicity of the membrane. Sterile aeration of filling vessels and fermenters, including cell culture vessels and CO2 incubators (6 to 120l) Aeration of storage vessels for sterile, distilled water and liquid media cultures Autoclave aeration In-line sterilisation of and particulate removal of air and gases, such as air sterilisation for small fermenters Easy handling The Midisart® 2000 is supplied individually packaged and pre-sterilised. The Midisart® 2000 can be connected directly to the existing system Reliability and safety The Midisart® 2000 can be tested for integrity and provides reproducible results. The membrane is reinforced with a grid of polypropylene, which gives the Midisart® 2000 unit additional stability and makes it resistant to pressures up to 3 bar (approx. 44 psi). Midisart® 2000 completely prevents the penetration of moisture due to its natural hydrophobic PTFE material. In addition, Midisart® 2000 is biocompatible according to USP Plastics Class VI. Midisart® 2000 units can easily withstand at least 20 autoclaving cycles without losing performance. The memory discs supplied with each Midisart® 2000 in UPN coded boxes allow the user to keep track of the number of autoclaving cycles by marking each cycle. According to GLP and ISO standards for traceable documentation, this feature of the Midisart® 2000 is the appropriate solution. Quality control Each unit is automatically 100% tested to ensure that the seals of the housings and diaphragms are defect-free. This is part of our Zero-Defect quality control testing. The batch number and individual Midisart® 2000 unit number are printed on the housing of each Midisart® 2000 to ensure complete traceability. Before the Midisart® 2000 units are packed, they undergo a visual inspection. In addition to 100% leak testing, random samples taken from each batch undergo the following tests to ensure Sartorius Stedim Biotech's stringent in-house quality standards: Housing Pressure Test Pressure Holding Test Bubble Point Test Pyrogen Test Sterile Filtration Capability Flow Rate Test Sterility Test Performance With a diameter of only 64mm, the Midisart® 2000 covers a filter area of 20cm², meaning Midisart® 2000 achieves peak flow rate performance. However, the Midisart® 2000 does not only multiply filtration performance in this way. It can be autoclaved at least 60 times at a temperature of 134°C! Midisart 2000 (non-sterile), PTFE, 0.2µm, Midisart® 2000 PTFE

There are no reviews yet.