Vacuum furnaces 0.7 cu. ft. (19.8L); 240V 600w 2.5A; Dial display

Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

Thermo Scientific™ vacuum furnaces reach maximum temperatures of 220 °C (428 °F) and are available with two control configurations and display options. These furnaces are equipped with independent vacuum and purge needle valves. The built-in wall heating system optimises uniform temperature distribution and saves chamber space for drying, curing, vacuum embedding and coating applications. Key features: 7.6 cm (3 in.) glass wool insulation prevents heat loss Silicone door seal and positive door latch provide a reliable seal at all vacuum levels Polycarbonate safety glass in door Vacuum level indication from 0 to 762 mmHg (0 to 30 in. Hg) Corrosion-resistant stainless steel vacuum and air lines ensure optimum chamber cleanliness and long-term performance Two removable aluminium stacking shelves Easy-to-clean Type 304 stainless steel interior Durable heavy-gauge powder-coated steel exterior Front-mounted three-way valves for evacuation, venting and purging with inert gases (e.g. nitrogen or argon). e.g. nitrogen or argon), with vacuum connectors at the front and rear of the unit Models 3606: Temperature control via hydraulic thermostat ±1.5 °C with a uniformity of ±5 °C at 100 °C, 635 mmHg (25 in. Hg) Built-in overtemperature protection Independent vacuum connectors for evacuation and ventilation on the top Models 3608: Temperature control via hydraulic thermostat ±1.5 °C with a uniformity of ±5 °C at 100 °C, 635 mmHg (25 in.Hg) Built-in overtemperature protection Front-mounted three-way valves for evacuation, ventilation and purging with inert gases (e.g. nitrogen or argon). e.g. nitrogen or argon), with vacuum connectors at the front and rear of the unit Models 3618P: Programmable microprocessor-based PID temperature control Regulates to ±0.2 °C with a uniformity of ±2.4 °C at 100 °C, 635 mmHg (25 in. Hg) Operates from a single setpoint or uses a 24-step program with temperature rise rates and dwell times 6.35 mm (0.25 in.) compression fitting on left for 6.35 mm (0.25 in.) outside diameter copper or stainless steel tubing Front-mounted three-way valves for evacuating, venting and purging with inert gases (e.g. nitrogen or argon), with vacuum connectors on front and rear of unit Ordering information: Digital units in torr and micrometer sold separately (must be factory installed) Required: vacuum connectors require tubing material with 0.6 cm (0.25 in.) inside diameter Capacity: 0.7 cu.ft., 19.8L Electrical amperage: 2.5A Designation: 0.7 cu. ft. (19.8L); 240V 600w 2.5A; Dial display Cabinet material: powder-coated heavy-gauge steel Capacity (Anglo-American).: 0.7 cu.ft. Cabinet material: Stainless steel Depth inside (anglo): 12 in. Depth inside (metric): 30cm Display: Bimetallic thermometer with 5°C increments Dimensions (D x W x H) Inside: 12 x 10 x 10 in. (30 x 25 x 25cm) Outside dimensions (L x W x H): 16 x 19.8 x 16.25 in. (40 x 50 x 41cm) Outside height (anglo): 16.25 in. Height inside (anglo): 10 in. Hertz: 50/60Hz Length outside (Anglo-American): 16 in. Shelves: 2, Aluminum Shipping Weight (Anglo-American): 130 lb. Temperature Range (metric): Ambient +10° to 220°C Temperature Resolution: ±1.0°C Temperature Uniformity: ±6.0°C at 100°C 25 ft.Hg Type: OTP Vacuum Range: 0 to 30 in.Hg Voltage: 240V Width Outside (Anglo-American): 19.8 in. Active power: 600w Width inside (anglo): 10 in. Electrical requirements: 240V 50/60Hz Vacuum Ovens 0.7 cu. ft. (19.8L); 240V 600w 2.5A; Dial display 0.7 cu.ft., 19.8

Product safety information

Manufacturer information:

Thermo Scientific - Equipment LED

, ,

There are no reviews yet.

Vacuum furnaces 0.7 cu. ft. (19.8L); 240V 600w 2.5A; Dial display - 0.7 cu.ft., 19