LABORETTE 27 Rotary cone sample divider basic unit - 115 V/1~, without dividing head, 4.259,60 €

Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

For representative sample division of solids and suspensions with a dividing accuracy of 99.9 %. Dividing ratio: (depending on dividing head used) 1:8, 1:10, 1:30 Number of dividing quantities: (depending on dividing head used) 8, 10 or 3 Max. feed grain size: (depending on dividing head used) 1:8, 1:10 or 1:30 Max. feed size: (depending on dividing head used) 2.5 mm or 10 mm Max. sample quantity: (depending on dividing head used) 2.5 mm or 10 mm Sample volume: (depending on dividing head used) 4000 ml - 2500 ml - 300 ml Useful volume Sample tubes: (depending on dividing head used) 500, 250, 15, 20, 25, 30 ml Range of application Rotary cone sample dividers form a symbiosis with high-precision analytical measuring instruments. They are used in every laboratory in research, development and process monitoring to provide small but nevertheless representative sample quantities for meaningful analyses. With the models of the LABORETTE 27 rotary cone sample divider, liquid media or suspensions can also be divided -without conversion. Especially when dividing suspensions with coarse-grained particles, the rotary cone sample divider reliably avoids the disturbing influence of segregation due to sedimentation of larger or heavier particles. Method of operation Outdated division principles such as „quartering“ or „coning“ no longer meet the high requirements of modern analytical methods. The best possible sample division today is based on the combination of three division methods in one device: The sample is fed through a funnel to a division cone whose shape corresponds to quartering and coning. At its lateral surface, the sample material is accelerated outwards by rotation of the entire system and divided into up to 30 individual streams by guide channels. The individual samples are collected in glass screw bottles. Due to the rotation and the number of dividing channels of the dividing head, the number of divisions increases to up to 3,000 dividing steps per minute, so that each sample is composed of a very large number of individual samples - a hallmark of exact sample division. Due to its design, the LABORETTE 27 rotary cone sample divider can divide with an accuracy of 99.9 %. The performance features at a glance one basic unit, combinable with 6 different dividing heads up to 3. 000 dividing steps per minute representative sample division with a dividing accuracy of 99.9 % Dividing of dry samples and suspensions - without conversion Variable dividing ratios Quick clamping of sample tubes 250 ml and 500 ml as standard Adapted sample allocation through LABORETTE 24 vibratory feeder Different sized glass collecting vessels from 15 ml to 500 ml Tested safety (CE mark) 2-year warranty Equipment The rotary cone sample divider is supplied without dividing head as standard. Dividing heads with different dividing ratios (1:8; 1:10; 1:30) and in different materials are available. The corresponding dividing head must be ordered as an accessory. The accuracy of the division is further increased by the use of the LABORETTE 24 vibratory feeder due to the uniform, slow material feed. In this way, even materials that are difficult to flow, such as cement or limestone, can be LABORETTE 27 Sample divider

Product safety information

Manufacturer information:

Fritsch

, ,

There are no reviews yet.