Peristaltic pump iPump6S-GF, flow rates up to 12000 ml/min, IP55, explosion protection

Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

The iPump6S-GF peristaltic pump is built for high volume pumping in harsh environments. The pump offers explosion protection according to DIIBT4. The drive can be combined with different pump heads for up to 2 channels. The motor speed can be adjusted in the range from 40 up to 600 rpm. Depending on the pump head and tubing, flow rates of 600-12000 ml/min are possible with this pump. In addition to the pump speed, the running time of the pump can also be adjusted. The setpoints can be adjusted via a membrane keypad, via the RS485 interface or via the analogue interface. The hose line can be filled quickly via a prime button. The current number of revolutions is shown in an easy-to-read LED display. The last set parameters are saved by the pump even when it is switched off. The stainless steel housing is easy to clean and offers IP 55 protection against dust and splash water. Flow rate: 600- 12000 ml/min Accuracy: 0.5% Speed: 40-600 UPM via frequency converter Accuracy: 1 UPM Pump direction: Forward, Reverse Timing: 0.1s-99 h Interface: RS-485 External signals: Start/Stop, Speed 0-5V, 0-10V, 4-20 mA, 0-10kHz Ambient temperature: 0-40°C Humidity: Peristaltic pump iPump6S-GF, flow rates up to 12000 ml/min, IP55, explosion protected

There are no reviews yet.