Sartopore® Platinum T-Style MaxiCaps®, 1.495,00 €

Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

Sartopore® Platinum T-Style MaxiCaps® sterile filters have been specifically designed to meet the filtration requirements of bio-pharmaceutical production in a cGMP environment. By using single-use components, major investments in stainless steel filter housings and costly cleaning validations can be avoided. The new and innovative technologies used for these filter cartridges result in unprecedented performance data. The use of Sartopore® Platinum for the critical step of sterile filtration results in a unique combination of quality, performance and cost efficiency. Outstanding performance Excellent wettability High chemical compatibility (pH 1-14) Temperature stable Low unspecific protein binding Low extractables level Reliable integrity testing New surface coating A new hydrophilisation process (patent pending) has been developed to permanently modify the membrane surface. In this process, a thermally extremely stable and hydrophilic polymer is applied directly to the complete surface of the membrane. This technology produces the membrane properties that are responsible for the exceptionally good wettability and low protein binding of Sartopore® Platinum even after extreme chemical and thermal stress. This allows multiple evaporation cycles in dry and wet conditions and in both directions without negative consequences in terms of wettability and integrity testing. New pleating technology - TwinPleat The new, innovative TwinPleat technology (patent pending) is characterised by an alternating sequence of long and short pleats aligned at a specific angle. This special design significantly increases the effective filter area (e.g. 66% compared to Sartopore® 2) and optimises the hydrodynamics during the filtration process. This results in an exceptionally long service life for the filter cartridges, making the filtration process much more efficient. Excellent wettability Sartopore® Platinum T-Style MaxiCaps® are very easy to wet. Less than 5 litres of WFI are required to reliably wet a T-Style MaxiCaps BH1 (1 m² filter area) and then test it for integrity. Due to the excellent wettability, the WFI consumption can be significantly reduced, which significantly reduces the filtration costs. Reliable integrity testing Insufficient wetting is one of the main reasons for failed filter integrity tests. In such a case, the affected filter must be re-wetted and retested. In addition to the extra cost of the additional tests, there is the risk of losing an entire production batch if the filter fails repeatedly. The excellent wetting behaviour of Sartopore® Platinum helps to eliminate this risk. The use of Sartopore® Platinum results in unprecedented reliability in integrity testing. Scale Up: With identical performance data for the different heights in terms of square metres of filter area, Sartopore® Platinum filters are perfectly scalable from small heights to large production scale. Sartopore Pt T-Style Caps, 0.2µm, 10, Sartopore® Platinum T-Style MaxiCaps®

There are no reviews yet.